PORSCHE 356A REAR ENDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1978-83 - Body (includes uncategorized and accessory items) 91150411302 This one-piece seal is furthest from the rear bumper, we recommend replacing this when removing the motor for maintenance. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. We recommend replacing both the small and large engine seals, the large is part # 91150411102 sold individually. 1 necessary per car. View/Change Diagram
From $12.88
Make a selection BBI9914010006 The bbi street cup suspension package improves the handling response of the vehicle by upgrading the factory springs with an improved linear rate springs and replacing the factory arms and links with the motorsport cup version that uses spherical bearings.
$7,295.00
Make a selection 91150534503 This seal tends to suffer from dry rot and degrades with time. Be sure to replace it before metal on metal contact occurs, destroying the paint work and allowing rust to develop. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. When servicing the rear bumper, we recommend replacing the bumper shock seals, part # 91150531100 shock bushings, part # 91150522100 and base, part # 91150522001 sold individually. 1 necessary per car. View/Change Diagram
From $15.50
Make a selection 96410601402EQ This OEM cover sits low nearest the rear bumper. If you are removing the motor for maintenance, be sure to check and replace the engine covers / heat shields as necessary. We recommend purchasing a new seal, part # 96410622301 and plug, part # 96410623701 to complete the installation. Sold individually. 1 necessary per car.
$601.70
Make a selection 93051221500 This beading runs along the seam of the rear wing on the rear decklid. It can detract from your cars appearance as it fades, cracks and is covered with wax build up. We recommend replacing it whenever replacing or restoring the rear wing. Sold individually. 1 necessary per car. View/Change Diagram
From $39.60
Make a selection BBI9965010002 • provides additional rear toe adjustment
$875.00
Make a selection 91150411500 This one-piece seal is furthest from the rear bumper, we recommend replacing this when removing the motor for maintenance. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. We recommend replacing both the small and large engine seals, the large is part # 91150411102 sold individually. 1 necessary per car. View/Change Diagram
From $52.80
Make a selection GT034 For those out there with very wide beyond factory flared fenders or using GT racing turbo flared fiberglass fenders, these turbo rocker panels are the finishing touch. They tie the front and rear fenders together and add the appearance of width to your Porsche. For 11 and 14 inch wheels. General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89 911 1974-77
$570.00
Make a selection FVD51299124MM The moshammer stormforce evo rs rear spoiler for the 991.2 model blends a bit of Porsche ducktail heritage into its design to increase rear downforce and reduce front axle uplift. The contours of this spoiler have a step effect which seamlessly blends into both rear quarter panels. When viewed at a standstill it has a subtle factory like appeal that complements the cars lines. When deployed the rake angle takes on a more aggressive appearance evoking thoughts of the much beloved ducktails. Like a majority of the moshammer offerings, this spoiler is a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looki...(choose a part on the right to read more)
$1,455.30
Make a selection WAP0407120A Fold-out stick in the same design as the Porsche sports car vehicle key. Porsche crest on the front. Led control light on the rear. The plug direction depends on the usb port being used. It can store up to 4 gb of data and is compatible with various operating systems including the Porsche communication management system with the individual universal audio interface option. In black with chrome. Dimensions: 53.5 x 38 x 19.5 mm General FitmentACCESSORY
$64.90
Make a selection P201 Change your cars look with the addition of lamin-x taillight kits. available in smoked or charcoal, the thick durable coverings are extremely easy to apply to your vehicle in the precut kits. offering a smooth, glossy, and consistent color throughout, the lamin-x kits are much improved over the less then effective spray on kits. the precut kits have adhesive backs to fit on any flat or shaped surface with ease. the smoked and charcoal kits are tinted only 17 percent allowing 83 percent light passage through. this is a great alternative to bulky plastic light coverings. General Fitment911 1974-77911 1987-89 911 1984-86 911 1978-83 930 1975-77 BOXSTER 1997-04
From $67.49
Make a selection FVD512997TTRS 997 GT3 rear spoiler fits all 997 tt includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass. Also available with wing blade in kevlar / carbon FVD512997gt3rs2 tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
$5,407.60
Make a selection 91150411502 This one-piece seal is furthest from the rear bumper, we recommend replacing this when removing the motor for maintenance. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. We recommend replacing both the small and large engine seals, the large is part # 93050417001 sold individually. 1 necessary per car. View/Change Diagram
From $36.00
Make a selection 91150332600 This seal sits on the trailing edge of the front fender at the top just below the windshield. It is also used under the back of the rear quarter panel where it meets the side panel. It is also used on the front bumper. We also recommend purchasing the lower seal, part # 91150332500 high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. View/Change Diagram
From $7.70
Make a selection GT016 This fiberglass replacement deck lid is an exact duplicate of the 1976 930 turbo “whale tail” rear spoiler. One piece deck lid. Inset grille sold separately. This is the famous whale tail first used on the 1976 turbo cars. Add down force and look great with this tail base/deck lid. Gt racing also recommends buying the grill part number rgt16g. Please specify 911 or 964 when ordering. The 964 needs hinge adapters, part number rgt11a. General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89 930 1975-77
$995.00
Make a selection GT030C If you wish to lighten up your 911, these fender fit the bill. Made of fiberglass, they replace the heavier factory steel fenders. Sold as a pair, these fenders weigh 6 pounds each (factory fenders weigh in at 28 pounds left, 25 pounds right respectively) with rear air exits, no gas bucket. General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89
$1,099.00
Make a selection CCTANFLAN Our custom-fit car covers fit your Porsche like a glove! Car covers are an excellent and inexpensive way to preserve your Porsche. Favored by traditional enthusiasts, tan flannel always provides a soft touch to pamper fine paint finishes. Designed primarily for indoor storage use, this woven cover is constructed from a durable polycotton blend. When ordering, please indicate your year, make, model, number of side mirrors, regular or turbo or turbo-look bodystyle, with or without whaletail spoiler, and which type cover you would like. These covers are made to order and may take longer to ship. When ordering, make sure you indicate year, model, bodystyle, number of exterior side mirrors, and with or without rear ...(choose a part on the right to read more) General FitmentALL
$389.00
Make a selection CB43207B Corbeau 3-point, 2" harness belts are an affordable way to upgrade your vehicle to harness belts. With a 3-point harness belt, the two shoulder straps go over your shoulders and through the harness slots in your seats. After they go through the harness slots these straps come together to form a y and you then mount the one remaining strap in the rear area of your vehicle. General FitmentALL
$119.00
Make a selection FVD33300902AT Send us your original spring plate and we will have it reconditioned for you. The reconditioning process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we install new rs spec. (85 shore) rubber bushings/bearings. 85 shore rubber is more durable than OEM 65 shore and provides more positive suspension location yet is still quiet and compliant for street use. Then we seal the spring plate with a corrosion resistant plating. Sold individually. 2 necessary per car. Please note: this only fits cars with the g50 transmission.
$261.80
Make a selection 91135295005EQ If your brake pads are at the end of their service life you will experience vibration, squealing, a pulsating brake pedal or poor response under heavy braking. We recommend replacing them as soon as any of the above signs are noticed. Also, be sure to inspect the rotors when changing the pads. For convenience, we sell complete rotor and pad kits, simply check under brake service kits. This pad set contains textar OEM (original equipment manufacturer) parts that we source in Germany to ensure quality, reliability and precise fitment. Textar brake pads are precision engineered to offer maximum safety, performance and comfort. This uncompromising approach has been the very ethos of textar for more than 100 years. ...(choose a part on the right to read more)
$72.60
Make a selection FVD34391101SET Replace worn-out original front lower control arm bushings to return your car to its intended suspension geometry and steering feedback. Features: better handling reduces that sloppy steering feel does not produce any noise like the teflon bushings. Rubber has the original shore hardness value of 65 (like oem) fit's like oem, simple installation made in Germany if you are looking for a sportier upgrade we suggest our sport lower control arm set, part # FVD34391192set. Set is sold per axle. 2 necessary per car.
$152.90
Make a selection 91150306803GRV This quarter panel extension is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. 1 necessary per car. We also recommend replacing the gasket, part # 91150318601 please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment. View/Change Diagram
From $212.40
Make a selection 91135508701EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. This line is a high-quality replacement made by brax. It is designed to perform like the original and has the same length and threaded ends. Includes the supporting reinforcement wire like the original. Sold individually. Right or left side fitment. 2 necessary per car.
$22.00
Make a selection BEC996002TTSR Brombacher exclusive covers are completely manufactured in the south of Germany in baden wurtemberg, between stuttgart and our local mountains in the southern black forest. The materials chosen is environmentally friendly production and each stich is made with care. 100% Germany quality, perfect, personalized appearance for every taste, even in the covered state a mixture of cotton and polyester nano-coated on the outside which makes it so dirt and water repellent, completely paint-friendly, with very breathable construction. Price includes: cover color selection, color selection of trim, custom embroidered logo and a matching bag with a small custom logo, in the same colors. Please let us know what model, year...(choose a part on the right to read more)
$793.10
Make a selection 90156555540 Window chrome trim fades and pits with time and detracts from your cars appearance. Replace it with this quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We also recommend replacing entire window trim to achieve a consistent trim appearance. Sold individually. 1 necessary per car. View/Change Diagram
From $75.35
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |